Saab 93 Key Fob Replacement
Saab keys of 93 can be expensive to change. The procedure is easy.
All you require is a flathead screwdriver, and some patience. Place the screwdriver in the middle of the case and slowly lift it.
It is recommended to keep spare keys and fobs. You will avoid being stuck and having to pay towing charges.
How do you replace a battery
Key fobs in all cars that lock and unlock the vehicle remotely contain an internal battery that will eventually go out. In the event that this happens owners can change the battery on their key fob themselves with a few simple steps. The key fob comes with two plastic flaps on the one side that must be open in order to take out the old battery and install the new one. The replacement battery is an ordinary coin cell CR1632, and the process for installing it is relatively straightforward.
After you have removed the emergency key, you can use the flathead screwdriver on a small piece of wood to split the case. Do not force the case too hard, as the electronics are delicate and can be damaged by excessive pressure.
Saab made some amazing automobiles, and a number of them remain in the world today. saab fob key replacement of the biggest problems with these cars, however, is their ignition keys. They're not durable, and the keys may become spongy or lose their grip with time. It can be costly for an Saab owner to purchase a new key from the dealer in the event they lose their primary working one. They'll need to replace the computer module and then program the new key to convince the car you are not attempting to steal it. The good part is that you can save money by replacing the case instead.
How to Remove the Manual Key
Key fobs that are used to lock and unlock cars are powered by batteries and they do have a time-limit. If you're like the majority you'll lose yours at some time. Fortunately that replacing the battery for your manual key fob is simple. The only challenging part of the process is removing the old battery from the case. But with patience and a flathead screwdriver, you can accomplish the task.
Once you have the new battery installed Now it's time to put everything back together. You'll require a flathead to open the replacement case of the key fob. Insert the screwdriver into the slot in the middle. Gently move the case until you can remove it.
You may have to reprogram the new key fob in case your previous key fob lost its connection to the security system of your car. You can do this by following the manual learning procedure to add a new fob for your Saab 9-5 2010. This method will not affect previously learned keys however, so you can use the existing FOBs in case they need to be re-programmed. This procedure is only initiated when the mechanical key of the vehicle is in line with the cut on the FOB.
How to Change the Case
Whether you're replacing the battery or manual key, it's best to replace the case as well. The cases are susceptible to wearing out, especially after a long period of use. Removing the case from your SAAB 9-3 can be quite simple and you don't require any special tools do it.
The first step for changing the case is to remove the manual key from the fob. It is done by pressing the blue SAAB logo on the fob and pulling the manual key out. It might be necessary to apply a little force in order to remove the manual key from the fob.
Once you've removed the manual key, you're able to begin working on removing the electronic components from the case. You'll require an flathead screwdriver to accomplish this. Use a gentle screwdriver, so that you don't harm any electronics. Once you've removed all electronics, you'll need to take the battery out. After you have replaced the battery you can put everything back into the original case. You can purchase new cases online at a reasonable price.
How to program the new key
Key fobs that permit you to lock or unlock your vehicle remotely, have batteries. However, they have a limited life span. It is important to be aware of this and change the battery on your key fob each three-4 years. It is a straightforward process that you can complete at home. All you need is patience and the smallest screwdriver, a flathead.
The first step is to remove the manual key. You can do this by pressing the blue SAAB logo on the key fob and pulling the emergency key out. It may require some force however, the key should come out easily. Once you have the key fob open, you can remove the old battery by gently pushing the screwdriver into the slot in the middle of the case. This will split the case and make it easier to access the electronic components.
It is now time to program the key. This can be accomplished by following the steps in this YouTube video by YouTube user Cyclone Cyd. This is a wonderful video channel that gives instructions on how to complete simple maintenance and repair tasks on vehicles.
Key fobs can be an ideal place to store an additional car key in the event that you lose or break your original. You can purchase a new key fob on the internet or at a local locksmith store, like United Locksmith. The cost is much lower than buying the key from a dealership. They will charge for the key and then program it into your car.